Flexible Keep Left Bollards | Night Owl

Flexible Keep Left Night Owl Bollards

A perfect solution for highways and non-highway applications, the Flexible Keep Left Night Owl Bollards is a new, low-energy absorption, highway sign providing an attractive, logical evolution in the iconic design of Keep Left Bollards.

One-Piece Flexible Keep Left Bollards Night Owl:

The innovative technology was developed to enable the fusing of two different materials within the manufacturing process. This technique produced a superior product which gives both the benefit of a flexible base material, which allows the bollard to completely collapse on impact, yet the ability to have a highly durable rigid MDPE polymer sign face. This massively reduces the typical cracking and blistering of graphics found on inferior (entirely flexible material) products widely seen in the market place.

• Low maintenance, simple one piece moulded construction.
• Reliable bounce back performance, irrespective of the type of impact (side scrape, side swipe or front on) with no mechanical parts to break or come loose.
• Withstand impacts up to 100km/h, returns to 97.9% of its vertical position within 55 seconds.
• Tough double skin sign carrier which dramatically reduces flexing to a minimum which reduces the chance of the retro reflective graphics from cracking, splitting and eventually falling off unlike competitor products.
• Good transitional visibility with 53mm wide side/top reflectors giving an impressive projected surface area of 0.045 M sq. The BS8442:2006 standard only requires 0.02M sq.
• Various retro reflective graphics combinations can be offered to suit a variety of solutions.
• Adapter plates available to allow the One-Piece Night Owl product to replace other popular bollards that have failed.
• The product offers an impressively low folding height of 130mm. When tested with low ground clearance vehicles the graphics together with the recessed graphics area provided reliable protected from aggressive scraping which can be found with alternatives.
• The unique dome shaped base gives a reliable bounce back performance irrespective of the type of impact or angle (side scrap, side angle, swipe or front on).
• The unique side reflector wrap as proven to be useful for better visibility at junctions for not just lower vehicles but also for waggon drivers with high cabins.

Specifications

• Bollard colour: White/Black
• Overall height: 1037.4mm
• Max. Bollard width (top section): 395.2mm
• Max. Bollard depth (top section): 50mm
• Base dimensions: 320 x 320mm
• Fixing centres: 228 x 228mm
• Sign face diameter: 300mm
• Front/rear reflector visible area: 0.16m2 (BS 8442 requires 0.15m2 min)
• Side reflector area: 0.045m2 (BS 8442 requires a minimum of 0.02)
• Weight: Bollard 5.5kg
• Lower edge of face conspicuity panel is 138mm above ground level.
• Lower edge of side conspicuity panel is 174mm above ground level (BS 8442 requires 100mm > 200mm)
• Materials: UV stabilised, Reflex grade, flexible polyethylene & UV stabilised Medium Density Polyethylene

SKU:68383097

Estimated Delivery Window

We aim to deliver within the delivery window mentioned on the product page, though this may vary slightly depending on the product, stock levels, and order size.

Please Note

Lead times are provided as estimates only. Orders placed today may be subject to change depending on material availability, courier capacity, and staffing levels.

Deliveries requested for a specific date or time may incur an additional fee; however, these cannot be guaranteed. Any re-delivery required due to the customer not being present, site refusal, or similar reasons will also result in an additional delivery charge.

Store Fittings Direct reserves the right to delay delivery, without liability for any loss or financial penalty, due to any direct or indirect factors beyond our control.

Pay By Card

The easiest way to complete your purchase is by paying with a debit or credit card during the checkout process, providing your card is authorised, you order will be processed Immediately. All major debit and credit cards are accepted including American Express 

Finance 

If you are looking to finance your order, we have teamed up with Iwoca to bring you some of the most flexible finance available today. If approved, you could enjoy up to £30,000 of credit with repayments from 30 days  up to 12 months! 
Please see our finance section for more information, or simply apply at checkout, you'll be redirected to Iwoca for approval, if approved, your checkout will automatically complete.

BACS / Bank Transfer

This can be the simplest way to make a larger capital purchase without using a third party.
If this is the preferred method of payment, please select Bank Transfer at checkout.
Bank transfers should be made within 24 hours of placing your order, using your order number as a reference in the transfer. 
If you require longer than 24 hours, please contact our team and we will be happy to assist.