Plastic Bollards | Recycled with a Steel Core

Recycled Plastic Bollards with a Steel Core

These car park bollards have a recycled plastic sleeve over a steel core. That gives you the strength of a steel bollard, with an outer sleeve that won't rust, chip or need repainting. They're black with 3 white reflective bands, so they stand out in car parks, service yards, retail parks and along pedestrian walkways, day or night. They stand 1000mm high above the finished floor.

Choose your type

• Type S: Car Park Bollard with Steel Core (BOL-10207). Our standard fixed walkway bollard, for marking out walkways, protecting building edges and keeping vehicles off pavements and verges.
• Type T: Anti-Ram Car Park Bollard with Steel Core (BOL-10208). A stronger anti-ram bollard with a longer steel core set deeper into the ground, and a core filled with concrete. It's for areas at more risk of vehicle impact, such as shop fronts, glazing and entrances.
• Type RS: Removable Lockable Bollard (BOL-10209). It can be unlocked and lifted out when you need vehicle access, like for deliveries, emergency access or maintenance, then put back and secured with a padlock.
• Replacement Sleeve (BOL-10233). If a sleeve gets damaged, you can replace just the outer sleeve instead of the whole bollard.

Specification: Type S Car Park Bollard

• Height: 1000mm above finished floor level
• Sleeve: 126mm diameter, recycled HDPE, with 3 reflective strips
• Steel core: 88.9mm x 4mm steel tube, 1500mm long
• Fixing: core concreted 550mm below finished floor level. Needs a hole 650mm deep, cored at a minimum of 200mm diameter
• Sleeve fixing: TEK screw security fixing

Specification: Type T Anti-Ram Bollard

• Height: 1000mm above finished floor level
• Sleeve: 126mm diameter, 100% recycled MDPE, with 3 white diamond grade reflective bands
• Steel core: 88.9mm diameter x 3mm steel tube, 1750mm long
• Fixing: core concreted 800mm below finished floor level, and the core is completely filled with concrete on installation
• Impact zone: built in, to help prevent damage to cars in low-speed knocks

Why choose a recycled plastic bollard over painted steel?

A painted steel bollard looks tired once it's been knocked a few times. The paint chips, rust shows through, and it needs repainting. A plastic sleeve is black all the way through, so scuffs don't show in the same way and there's no painting to do. You still get the strength of a steel core inside. The sleeve also gives a little in a low-speed knock, which helps reduce damage to cars.

Which type do I need?

For most car parks and walkways, Type S does the job. Go for Type T Anti-Ram where a vehicle hitting the bollard is more likely or would cause more damage, such as near glazing, shop fronts or entrances. Choose Type RS anywhere you need to open up access now and again.

How are they installed?

The steel core is set in concrete first, then the sleeve slides over it and is secured. For Type S, core drill a hole at least 200mm wide and 650mm deep, set the core in position, and fill the hole with concrete. Once it's set, fit the sleeve over the core and fix it with the TEK screw. The concrete foundation should follow a structural engineer's design. Full installation instructions are shown in the product images.

Why buy from Store Fittings Direct?

• We can install them for you (additional cost). Just ask for a quote
• Large quantities, trade accounts and help choosing the right bollard. Call 0116 318 4182 or contact us
• We're an ISO 14001 certified business

See our full ranges of plastic bollards, anti-ram security bollards and all bollards.

SKU:54906265

Estimated Delivery Window

We aim to deliver within the delivery window mentioned on the product page, though this may vary slightly depending on the product, stock levels, and order size.

Please Note

Lead times are provided as estimates only. Orders placed today may be subject to change depending on material availability, courier capacity, and staffing levels.

Deliveries requested for a specific date or time may incur an additional fee; however, these cannot be guaranteed. Any re-delivery required due to the customer not being present, site refusal, or similar reasons will also result in an additional delivery charge.

Store Fittings Direct reserves the right to delay delivery, without liability for any loss or financial penalty, due to any direct or indirect factors beyond our control.

Pay By Card

The easiest way to complete your purchase is by paying with a debit or credit card during the checkout process, providing your card is authorised, you order will be processed Immediately. All major debit and credit cards are accepted including American Express 

Finance 

If you are looking to finance your order, we have teamed up with Iwoca to bring you some of the most flexible finance available today. If approved, you could enjoy up to £30,000 of credit with repayments from 30 days  up to 12 months! 
Please see our finance section for more information, or simply apply at checkout, you'll be redirected to Iwoca for approval, if approved, your checkout will automatically complete.

BACS / Bank Transfer

This can be the simplest way to make a larger capital purchase without using a third party.
If this is the preferred method of payment, please select Bank Transfer at checkout.
Bank transfers should be made within 24 hours of placing your order, using your order number as a reference in the transfer. 
If you require longer than 24 hours, please contact our team and we will be happy to assist.